Retains performance even at humidities as low as 11% Independently tested to IEC 61340 - 4 - 1 and BS 7506. Makes charge dissipate off a standard vinyl floor. Improves the conductivity of conductive flooring. Applies, hardens and protects like a normal floor polish. Non-slip
Application: For all linoleum, P.V.C., rubber, sealed cork, sealed wood, terrazzo and thermoplastic floors. N.B. Not suitable for unsealed wood, unsealed cork or laminate flooring.
Directions: Selstat must be applied to a clean grease free floor. Strip old polish with Selate then rinse thoroughly with clean water, allow floor to dry. Apply a thin even film of Selstat using a clean lint free mop or applicator. Apply a second coat when the first is dry (approximately 30 minutes). COVERAGE: 60 square metres per litre. Full independent test reports are available on our website. N.B. Buffing is not recommended as this will reduce the static dissipative property of the polsh.
Technical
Composition: A blend of acrylic copolymers, resins and coploymer wax incorporating a antistat agent, wetting agents and film forming aids in a stable water based emulsion form incorporating metal cross linking additives.
Appearance: Opaque liquid
Colour: white
Viscosity <10 cps
Density 1.028
pH 8.0 - 8.2
Activity 18%
Fragrance: Characteristic, slightly sweet
Stability: 2 years in unopened containers
Biodegradability: All surfactants contained in Selden Products meet the requirements of the EU Detergent Directive 2005 – 2004/648/EC. This requires all surfactants to break down both quickly and completely into harmless material such as CO2 and water.
Storage: Protect from freezing
Flashpoint >100
Product is for professional use only.