Full Power graffiti remover for porous surfaces which removes spray paint on the first pass, removing the need for harsh anti-ghosting products.
Full Power breaks the graffiti up without dissolving it. This prevents the graffiti from soaking into the wall. The broken up flakes of paint are then easily removed with a pressure washer without leaving any ghosting. State of the art formulation removes leather dyes, inks, stains and waxes, the new graffiti markers of choice. Full Power is not suitable for use on solvent sensitive surfaces such as plastics & polycarbonates. Though Selden cannot comment on the environment impact of the graffiti, this Full Power Graffiti Remover has an exceptionally good environmental profile. Does not contain either acids or caustics.
Application Compatibility: Bare metal ✓ Brick, concrete, breezeblock & stone ✓ Bare wood (untreated) ✓ Polyethylene ✓ Polypropylene ✓ Any other plastic ✕ (will damage) Polycarbonate ✕ (will damage) Treated wood e.g. outdoor fencing ✕ (may attack treatment) Paint (any type) ✕ (will remove) Varnish (any type) ✕ (will remove) Fabrics e.g. cloth, carpet ✕ (will damage)
Directions: Spray product evenly across graffiti. The product will adhere to the graffiti, and break up the film so it will wash off the surface. There is no traditional solvent action, the gel will not dry out. Contact time of up to 1 hour can be expected though less aged graffiti will remove much quicker. Scrub briefly with a stiff brush prior to removing with a pressure washer. On non-porous surfaces, such as metal, the graffiti can be scraped or wiped off with a paper towel. After rinsing apply Power Off sacrificial coating for long term anti-graffiti protection.
Technical
Composition: A blend of oxygenated solvents, surfactants and rheology modifiers
Appearance: Hazy gel
Colour: Colourless
Density: 0.9
Fragrance: Low solvent
Stability: Two years minimum
Biodegradability: All surfactants contained in Selden Products meet the requirements of the EU Detergent Directive 2005 – 2004/648/EC. This requires all surfactants to break down both quickly and completely into harmless material such as CO2 and water.
Storage: Pressurised container. Store out of direct sunlight. Temperature must not exceed 50oC
Aerosol Information
Propellant Hydrocarbon
Pressure 40 psi
Spray Rate 4
Product is for professional use only.